To Order,
Please Call 623-581-1994
Questions, e-mail us Info@whaccessories.com
Monday-Thursday
9:30-5:30 PST Closed Fri to Sun
|
Press & Customer Mails |
|
|
| Check out Motorcycle Consumer News, November 2007 issue, page 29 and read about the GSG foot peg lowering kits.
|
 Motocyclist September 2007 The VTX 1300 will be in the movie "Hellride" which will be in the movie theaters on Jan. 18th 2008 We supplied the Kellermann BL 1000 Bar Ends Signals |
|
 RoadBike Magazine August '06 Page 70 |
 RoadBike Magazine April '06 Pages 86-90 |
 SuperStreetBike Magazine July '05 Page 90 |
 SuperStreetBike Magazine May '05 Also check page 10 and 84-87 |
 Cycle World March 05 Page59 |
 Motorcyclist January 03, FZ 1 Accessories Page 62-71 |
| Customer Mails |
|
May-5th-2008 Hello Irfan I received the sliders and reservoir yesterday and bolted them up! I am very pleased with both, thanks!!!! The reservoir was VERY easy to install. I removed the OEM remote reservoir, tubing and fitting as one piece, replaced the o-ring, and bolted on the new reservoir....added fluid, one go with the Mity-Vac, and done!! :-D I attached a few pics. I purchased the GSG-Moto reservoir, Bide Side seat cowl, Metisse X-Pad sliders and Spiegler brake/clutch lines from you. Auf Wiedersehen!! Dave |
|
May-5th-2008 Wild Hair Wanted to thank you very much for getting my GSG clutch cover (Bandit 1200) to me in time for the Miami Bike Show! The Clutch cover was worth the wait, as well as the money. Top notch billet! I sent along a photo of the bike sporting your cover. I had it powder coated black. Came out beautiful! Thank you all very much! Best Regards Shane Buchanan |
|
May-3rd-2008 Hi Irfan I got the GSG Fork sliders last Monday and put them on right away they look great here's a pic of my bike taken last year the MBD belly pan and hugger I got from you and I have some kawa engine guards but they made the bike to wide. Thanks Dave |
|
April-10th-2008 Thanks again. Wild Hair is now at the top of my list for future bike improvements. Take care, Irfan. |
|
April-6th-2008 |
|
March-5th-2008 Hi Irfan, I got the guards ok. Arrived the day before heading to World Superbikes races at Phillip Island. They look great and got some positive comments from others. Well done! I would be happy to do business again and will recommend you my bike enthusiast mates. Cheers, Michael |
|
Febuary-05-2008 Thank you for your service, I'm happy as hell. Chuck Says Chuck about his Hesa Tail Section for the ZRX |
|
January-24th-2008 |
|
November-30th-2007 Your belly pan made a big difference. I'm very happy. Baron |
|
November-12th-2007 Subject: Thanks for the 919 parts pics enclosed Thanks for the great communication. The GSG belly pan and TCP radiator fairings are great. I've dealt with a lot of suppliers before and you guys are the best. Check out my 03' 919 pic with the parts installed. Thank you, Loren P.S. She's super fast in the 1/4 mile 8.70s |
|
August-17th 2007 Irfan, hope all is well with you. thank you soooo much for getting the "TCP Seat Cowl" ( 07 FZ6) to me so quickly....the finish quality...fit and finish is amazing.... and beautiful to look at also. please let me know when the '07 Radiator Cowls become available.......you have my authorization to go ahead and order them in: '07 Yamaha Deep Red Metallic, when they are if you like. look forward to hearing from you, thanks again, Lance in Hawaii. |
|
August-12th 2007 Hello Irfan! Received the Meissner exhaust kit ( FJR 1300) and installed. No problems with installation and I am very pleased with the sound, which I would describe as in between stock cans and headers-a good sound for a sport-tourer. Very good quality inserts and clear instructions-I would highly recommend them to anyone considering them. Thanks for your (as usual) information, prompt attention and quality product. Gordy |
|
July-26th 2007 Hey it was great to get to meet you at Moto GP. Wells hears a few pics of my bike. As you can tell I've changed it a bit. Your frame sliders, Telefix clip on's. Giles rear sets your fairings and a few parts I picked up a long the way. Hey thanks for all of the help. we will see you a round............... Danny |
|
July-12th 2007 Hi Guys I need to replace the right side puck (GSG Protectors) on my 04 FJR 1300 after being hit and knocked down by a NO SIGNAL LEFT TURN cage. I hope individual replacements are available. By the way they saved the right side fairing from being destroyed in a 100 foot slide on asphalt at 30 mph. Thank god they also protected my right leg Thanks again Bob |
|
July-10th 2007 That is AWESOME! Even quicker than you had promised. Thanks for everything. You're the best. Irfan you Rock ! Josh |
|
May-9th
2007 |
|
Febuary-13-2007 THANK YOU. IT'S A PLEASURE TO DEAL (AND WILL CONTINUE) WITH SUCH A SERVICE-BASED AND CLASS OPERATION. SKIP |
|
January-31-2007 Now that's what I call customer service, most companies that I have sent emails have not yet answered and you guys answer me the same day, thanks. |
|
November-21-2006 I received the bracket (GSG Muffler Bracket GSXR 1000) and WOW does it look AWESOME !!! very nice piece !! Thanx R.J. |
|
October-23-2006 Thank you so much! I hope you continue to get additional items for the FZ6. You have been awesome to deal with. Thanks again! Rhonda |
|
October-18th-2006 Received GSG PROTECTOR ,very nicely made. That was quick and thank you. Rodger |
|
September-26th-2006 Irfan The GSG muffler bracket and MEK brake & clutch covers arrived today. Extremely nice! I'll call you later in the week to order a chain guard. This hardware will fit perfectly in the scheme. Thanks for the fine pieces, and for getting them to me exactly as we discussed. Bob |
|
August-22nd 2006 Irfan, hey thanks for the note. I appreciate the knowledge you have of your products and how they fit around other different aftermarket products. From what you explained and from the pictures, it looks like I will just have to modify the pan in the one area by the swing arm on the right hand side. If this is the case, then yes I am still interested in the Gimbel Pan, so go ahead and order it. Thanks again Irfan for all your knowledge and help. Oh, by the way, I checked out your bike on your web site. It is one cool looking bike...talk about a pure Streetfighter! I bet you have probably created some accidents from all the head-turning you cause from people looking at the machine. How many old ladies have you offended with that one finger sticking out on the right side of the Gimbel pan? I think the first thing you said after you bought the Zrex was, hmm, how could I make this Zrex look like anything except a Zrex. Hey, take care. Todd |
|
August, 8th 2006 Irfan, The GSG sliders are top quality and actually saved my '05 FJR1300ABS and perhaps myself when some idiot in a Scion mini-van decided he wanted my lane on the freeway at about 68 mph. I survived the impact and stayed upright to pull over and deal with this jerk. The right GSG slider and mounting bracket were damaged along with most of the plastic bits - but the expensive frame, engine and clutch case - even the fuel tank were unscathed. You may recall my order for the single-side replacement. I forgot to mention that the right GSG mounting bracket was slightly bent and the nylon stud was scuffed just a bit. But it ran almost the whole length of that flipping Scion and left a linear dent as though someone was trying to enter it with a can opener. about $3k USD just for that damage alone. I cannot say enough about how strong, well placed and designed those sliders are. All the best John |
|
August 7th 2006 Irfan, I received the GSG Mototechnik frame and clutch sliders for my '06 YZF-R1 L.E. this morning. Had them installed (with blue Locktite) to the specified torque specs within ~30 minutes. They are very attractive and look quite strong. I am certain you will see some orders coming your way as I highly recommend them and the Limited Edition always attracts fellow enthusiasts. Shot a few lousy pics in a hurry (trust me - I am a better rider than photographer). They are attached. I am really happy to get those sliders mounted. Thanks for making it happen All the best and good selling, John from California |
|
March-30-06 Hi, I'm writing to thank you for an excellent product (Metisse Protector - Strada) which did an excellent job protecting my 2001 FZ-1 Yamaha in an encounter with a Smart car yesterday. The one on the right tore up the side of the car and ripped off the bumper while the one on the left protected the engine when the bike landed on the left after I hit the car. My left protector is fine, but the right one bent back on the bolt that holds it in place. Even though I straightened it out, the bolt is damaged and must be replaced. Can you please send me a replacement bolt? Thanks. Mike |
|
March-16th-06 Thank's for the fast shipping! I installed the Micro 1000 LED's, and they look good! I'll send a pic when it warms up a bit. Thank's again, Ben C. |
|
March-13th-06 hi Irfan... the MEK Levers for the Vmax are outstanding.. really love em.... thank you Gary |
|
Feb-09-06 Irfan Meissner Handle Bar Adaptors arrived today (Friday in NZ). Less than 1 week from order to delivery. Appreciate the great service. They look to be incredibly well engineered. A very impressive product. Please don't hesitate to use me as a reference for any other customers in New Zealand. Thanks Allan |
|
Jan-02-2006 Hello and happy new year! As promised, attached are two pictures of the Kellerman Micro 1000's install on my car, a Lotus Seven replica. One picture shows the old indicator mounted on one side with the Micro 1000 on the other, and the second pictures shows the completed installation. I'm very happy with the results! Feel free to use the pics in your gallery if desired. Thanks, Stan |
|
October-30th-05 Hi Irfan, The boys at Metisse must be getting better at hand-laying carbon fiber cuz the MET Carbon Engine Starter Case Protector is absolutely gorgeous and was well worth the wait. Thanks for getting parts like those out to us. You're the best. Gerardo |
|
October-29th-05 my 2000 CBR600F4 looks great because of your unique products. you are champions in my book. sold on wild hair for life thank you very much from a very happy customer John, Shreveport , La |
|
August-14-05 I'm Loving My Hesa Radiator Cover (Z1000) Well worth the wait: |
|
August-01-05 Hi, here are some pics of my 2003 Z1000. I just put the Big Bike Belly Pan on. I love it, Looks awesome. Thanks for everything, You guys are truly awesome!!!! Jerome aka KawasakiFighter |
|
May-06-05 LOVE YOUR WORK. TA!! (THANKS IN AUSTRALIAN) Paul |
|
April-19-05 Irfan, Absolutely love the cover. Looks better than I imagined. I was surprised to see it sitting at my door this afternoon. Your phone call Friday was a surprise, the shop is closed weekends. You were pleasant to deal with on the phone, the absolute best customer service I've ever received. Thanks again. Shawn |
|
March-23-05 Just wanted to say thanks! I received the Bike Side Belly Pan today and I love it. It was worth waiting for. I'll send you some pictures of my bike, when I paint it. ~Jon |
|
March-20-05 Hallo Irfan! Ich bin durch Zufall beim googeln auf diese Seite getroffen und muss sagen das sie wirklich gelungen ist. Vor allen Dingen aber finde ich eure Geschäftsidee sehr geil. Deutsche Biketeile in Amerika verkaufen wirklich genial, nur leider bekommt man ja amerikanische oder andere Import-Teile hier in Deutschland so schlecht eingetragen. Gratulations for all your American
motofreaks because you don't have to worry for TÜV while your
customizing your bikes. |
|
March-10-05 Hello Irfan I recently received and installed the Bike-Side solo seat, the GSG-Moto side covers, the clear clutch cover, and the G-Pack! I absolutely love the super clean fit and finish of all your products! The G-Pack is awesome, it really woke up and smoothed out the performance across the rpm range! The G-Pack took my bike to another level! Thank you for being informative and following through with all my requests! It has been a pleasure doing business with such a reputable person! I would recommend all to you! I hope to see my '02 Bandit on your website. Sincerely Chris |
|
January-07-05 Irfan, just received my Metisse frame sliders for the Z-1000. Although they are the fine German pieces of art that I expected, I am more impressed by your service. You were knowledgeable about your products, courteous by both calling and e-mailing a confirmation, and your promptness is unheard of. I received my order on the second afternoon. I look forward to doing more business with a true professional. Thank you again --- Dan T --- p.s. let's hope I never need the sliders |
|
December-20th-04 Hello Irfan, I got the belly pan Saturday and in good shape, thanx for all your help, YOU ARE THE MAN!!! Philip |
|
December-17th-04 Gentlemen, I purchased a set of the GSG frame sliders for my 2005 FJR1300 from you. Just wanted to tell you that the quality of the product is outstanding, installation was a breeze and I have had many compliments on them. Regards, Phil, Jacksonville, Florida |
|
October-02-04 I recently bought a 2000 Suzuki Bandit 600 on Sept 8th 2004. I was unsure of buying the bike because of not being able to accessorize it with aftermarket parts. Then one night I seen your website. YOU GUYS HAVE EVERYTHING FOR MY BIKE!!!! Everything I've been looking for and then some. I will be spending lots of money with you guys. Thanks. Marcus Chattanooga, TN. 37412 P.S. Feel free to post this on your site. |
|
September-29th-04 Recently I purchased an Aprilia SL1000 Falco, for which I am surprised to see so few fitting accessories on your site, and this weekend I installed the Kellerman BL1000 Bar End Turn Signals on my Falco. To say they look good is an understatement - they look like the bike came from the factory with these turn signals, the quality and fit and finish make them seem a bargain deal! Thanks for carrying such great products! David |
|
June-21-04 Hey Irfan, Got 'em today. Really cool! Thanks for shipping them to me so quick. 100% satisfied with the products, And 110% with you. Thanks, Until next time, Rich |
|
March-29-04 Got my Metisse undertail installed it fits perfect, thanks for your help great product, GREAT service. JIMMYZRX ZRXOA# 4874 |
|
March-24-04 I recently purchased a black set of Micro 1000's for a 2000 Ducati 996. They look great. The fit was perfect and I made the connections in about 1hr. I had some trepidation about the look/fit as compared to the OEM part. You answered all my questions about size and specs on the phone and I appreciate it. As far as comparing it to the OEM part? There is no comparison! These lights are super small and just as bright. I would highly recommend the product. Thanks Edson |
|
Jan-31-04 I have a year 2000 SV 650. The installation of the G pack was accomplished by lifting the tank and plugging into the connector bundle on the left side of the air box. You can tell by unplugging the bundle and trying to start the bike. Unplugged you can't, plugged you can. Insert the G Pack where the plugs come apart. The result is amazing. In 2nd and 3rd gear it performs as promised. Power is crisp in all gears but in 2nd and 3rd it just keeps coming on! Great work Nikko and Metisse! Rich D. |
|
Jan-30-04 Hey, I got the Gimbel rear sets (GS 500) today & just wanted to say thanks a lot! The shipping to my house was super fast & I really appreciated the great service. They look real sweet. Take it easy! Eric |
|
Jan-12-04 Irfan, Thank you for the fast service, I received the ZRX Logo chain guard on Saturday, very nice product. Regards, Jeff (Snoopy ZRXOA #3730) |
|
Jan-09-04 Hi this is Dean, the Hesa seat cowl and the MBD belly pan 919 had arrived and I am HAPPY.....they look great and I will tell all my buds about you. ...............THANK YOU and have NICE DAY.................... |
|
Dec.-29-03 I installed your micro 1000 turn signals a few weeks ago. For Christmas, a very kind family member gave me the bar end signals which I installed over the weekend. These two products are the most impressive aftermarket products that I have seen in a long time. The materials, fit and finish are all excellent. On top of that, they perform better than the stock items. That is frankly astounding for a low profile turn signal replacement. I recommend these to anyone who appreciates excellent engineering. mit besten Grüßen, Mark |
|
Nov.-26-03 Hallo, W.H.A. It's Lee from CT., FZ1 guy. Some time ago we discussed an updated pic. with the most recent additions included. (GSG-Moto passenger pegs & mounts). Well here ya go- love the product and result. I tell everyone I meet on two wheels about you guys, I hope business is good 'cuz you're the best place for all the cool stuff. Regards, Lee P.S. Happy Thanksgiving! |
|
Oct.-11-03 Thanks again for the speedy delivery of my parts, the Telefix bars are awesome! and the GSG-Moto Muffler Mount goes great with my struts. I will be needing a belly pan soon and will contact you. Once again thanks for the great service. William |
|
Sept.-22-03 Thanks for your reply and your wonderful customer service. I did get my order today and just got done installing the two items. I'm very pleased with the quality (Metisse Radiator Cover & Hesa Chain Guard) and love the way they look on my Z1000. Thanks, Jason S. |
|
Sept-14-03 I just wanted to let you know that I got the turn signals (Micro 1000) today, WOW that is fast delivery and they are exactly what I was looking for too. Thanks again!!! Barry |
|
July-09-03 I just finished mounting my Bike Side rear hugger on my FZ-1 and I must say it was definitely worth waiting for. Not only did it fit perfectly but it looked real good with all the other carbon fiber I have on my bike. I'll try and send some pictures as soon as possible and I'll put in a good word for your company every chance I get. Thanks, Todd |
|
July-03-03 Sir, I received my MEK Vmax carb covers in the mail. today. They are very sharp indeed. Look great on my Vmax. Thanks for good service and look forward to other purchases in the future. Darian |
|
June-09-03 Just a note to say thank you for getting my SV650 lowering kit to me so quickly. I would have written sooner but I have been out riding my bike and LOVING the way the kit helped get it down to where my feet are flat on the ground. I ordered my kit on a Thursday and it was here Monday. The parts are great - you sure weren't kidding at the German high standards! My compliments to the companies! Well, thanks again. Sincerely Donna |
|
June-03-03 Hello Irfan, About a year or so ago you sent me a GSG-Moto seat, and here is the finished product! Thank you for helping me make my bike better than even what I thought it could be! Thanks again, Dwight |
|
May-29-03 Hi from N. IL. Just a quick note thanking you for your quick shipment of my new Metisse chain guard. The quality, fit and finish is excellent and with my polished rear sprocket, it really enhances the left side view of my bike. Thank you again. David |
|
May-20-03 Good Afternoon, I recently bought a G-pack for my Suzuki Katana, and I have been meaning to write and tell you how much I love it, it was well worth the money. Thanks Kevin |
|
April-21-03 Greetings, I promised a picture of the MBD Belly Pan (ZR 7), when they were painted, and mounted. Here it is. Really enjoy the products, and your outstanding services. Keep up the good work. Roger, GA |
|
April-14-03 Everything arrived in good order. I very much appreciate the care you took in packaging. I have had the parts for a few busy days. Just now getting around to thanking you for doing a mighty fine job. I ordered a Muzzy system from my local dealer a few days before I placed my order with you, your parts have been with me for a few days and the Muzzy just got to the shop today! You outran Muzzy and they are here in the States! Thanks! :) Chris |
|
April-12-03 Hi Irfan, Well, Finally decided to let you know how much I enjoy the Radiator Cover & Hugger inner fender. Just simply love these products! By the way, the Hugger went on almost flawlessly, after I found the lost bolt I was looking for a half hour!!!! Thanks for your time, Best Regards, Gary |
|
March-24-03 Hey, I just wanted to say, that I have ordered a couple of accessories from you and have been very pleased. Not only do you carry a great selection, but you also are very helpful even after the sale. I will buy my modifications from you whenever possible. Thanks Aubrey |
|
March-11-03 Irfan, Here are my Honda 919 pics. Kellermann Micro 1000 front and rear sets, also I have a factory wind screen from Honda and a plate holder from Rizoma (made in Italy, and not well though out for the states. I had to do a few mods to the plate holder and still not happy!) I am very happy with the Kellermann turn signals! They match the bike perfect. sorry if the bike is kinda of dirty, but what can I say we still have 3 inches of snow on the ground! hope to stop by and see you when I am out in AZ. I will be there form 3-26 to 3-31-03 Sean |
|
Feb-19-03 I just put on my Nikko extreme high rise pipe with Alu can. It probably took me almost 2 hours to finish the job. Your going to have to make some modifications to a GSXR. The back right net bracket will need to be bent or removed. The mid-pipe and can need to be bent a little bit so it doesn't touch the fairing.You also will need a longer screw to mount the can ring. Other than that it was easy once you get over the fear of cutting your stock exhaust. It sounds great, comparable a Micron in my opinion. The pitch at idle is a nice deep sound but she'll scream if your riding hard. The Power difference is incredible. Before, I had trouble getting the front wheel up, last night she just came right up no questions asked. Its hard to believe. I am more than satisfied and would recommend Nikko to anyone, its worth the month wait. Attached are some pics of my bike Kevin |
|
Feb-03-03 Dear Irfan, Thanks for the tech support. I went back and rechecked everything, and found that I had inadvertently pushed one of the choke cable for one of the carburetors off its seat, thus leaving the choke partially on. Problem sorted. It revs, it idles. No glitches. So I got the bike running, took it out for a spin, and regads, the G Pack works just as advertised. Definitely more power in the stated rev range for the stated gears. As they say in England, "top quality kit, that one". Good value for money |
|
Jan-13-03 Irfan Received the Metisse rear hugger for the RF the same day I asked about it. Installation was easy. Fit and looks are very good. Thanks. Steve |
|
Jan-01-03 I recently purchased a set of Black on Black Hagen Formula Mirrors for my '93 GSX1100G. I absolutely Love them! Small, stylish, and Show Room Quality. My bike is getting rather rare so to have these mirrors just compliments the bike that much more. Thank You again. Joe |
|
Jan-02-03 |
|
Dec-30-02 Irfan, Got the Hagen low rise bar today, installed it tonight.... I LOVE IT! Thanks buddy! Hope you have a terrific New Years! Will call you next year ;-) Brent |
|
Dec-10-02 Nik Sparling |
| December-09-02 Irfan, thank you so much for such a speedy mail out. In reply to your request, here is a picture of the ZRX that already has the first set of Hagen F1 mirrors that I had ordered from you guys. I thought I'd get somewhat of a close up of the mirrors since most of the pictures you've got sent in don't get very close to show how slick the F1 mirrors look close up! Lotsa cool stuff on your website. I'm sure I'll be in touch with you as the second ZRX comes to life. It's going to be quite a project, but then your website may make things a bit easier, such as going to the supermarket for parts. Thanks again Sheldon |
| December-04-02 Just wanted to say thanks for the good service on the shirt that I purchased last week. The shirt arrived on Monday December 2. Thanks again, Brian |
| Novenber-14-02 Hey Irfan, Its Blake in Denver. I finally got the computer working again and wanted to say.. WOW I love the new tail section (Hesa tail for ZRX). It was worth the wait. Anyway these are pictures of my ZRX with some of the parts I received from you and my Wife's Ninja 250 project (no parts from you yet, sorry but I'm working at it) I also wanted to send some pictures of my self and a couple of my projects. I work at the largest selling Yamaha shop in the U.S. (though I'm a Kawasaki guy myself) and have been talking to an increasing number of customers interested in street fighters. I give them your web-address every time. Best wishes, Blake |
| October-17-02 Irfan, The Metisse side radiator covers showed up today. You got 'em here pretty fast - thanks! Great fit and finish - just like everything else I've ordered from you. Paint is on its way also and I'll have to send you a photo of the finished set up. I can't wait to get them on now - the bike will be just about how I want it when they're done! Thanks again as usual Irfan. 1 Loyal customer, -John PS - there's a Wild Hair Sticker on the Bandit now too! |
| September-17-02 Thanks Irfan, I got the hugger last week and It is cooool, Looks great on as well. Great packing and super fast shipping, I hope we have pleasure of doing business again.. Thanks again Paul...:-) |
| September-05-02 What a great response! Now I know why all my fellow ZRX riders order their aftermarket parts from you. You may rest assured that you have my business. Thank you for your prompt reply and keep up the good work. It is really refreshing to find a business that values and takes care of it's customers. I will recommend your business to all my fellow motorcycle riders. If you continue to treat your customers as well as you have treated me I am sure that you will stay in business for a long, long, time. Ben. |
| September-05-02 Received Radiator Cover, love it, great fit Thanks, Rusty |
| August-30-02 Hallo, Irfan. This is Lee -F Z 1 guy. I installed the Metisse Frame Protectors and they're 1/2 as ugly as I thought they would be!!! Seriously, I got a couple of positive comments on them (much to my surprise) and they make halfway decent highway pegs to boot! L O L. The Metisse Tail Lifter (dogbone) for the suspension makes a HUGE difference. That combined with the Hyperpro spring and the 65 series FRONT tire cured my complaints with the rear end; a combo I would recommend to anyone. The only downside is the the rear tire now touches the ground with the bike on the centerstand. No big deal, though. Overall pretty satisfied as usual when dealing with W H A!! Have fun in Deutschland. Regards, Lee |
| August-01-02 Hello, Thanks so much for providing such a wonderful product, it saved my bike from damage the other night. After dinner I went to take my bike off the center stand and because of this &^**^&# up parking lot the bike pivoted the wrong way and it pulled me right over on top of my bike. I can't tell you how much it hurt to fall on top of my own bike the Metisse protectors did their job but the sticker is mangled and I had to tear it off the right side. Is there anyway to get another sticker to replace the one I had to take off?? I sincerely hope so because it looks so much better with it on. Can you please let me know by e mail. Thanks for offering a product that saved my bike and I hope that I can get it back to looking the way it did before it fell over. Sincerely, Grant |
| July-31-02 Irfan, BTW, really like the Metisse Strada Crash Guards on my V-Max! Especially looked good parked next to my buddy's Max with the Yamaha guards! Great product! Thanks! trueblue |
| July-18-02 Hi Irfan, Just thought I'd let you know that the signals arrived yesterday. These Micro 1000's are the best quality signals I've ever seen......much better than most of the other stuff out there. Thanks for the quick service. Regards, Peter |
| July-17-02 I wanted to say that I ordered a G-Pack for my 2000 GSXR 600, and it did make a difference. It seemed to eliminate all hesitation in the areas specified. The motor seemed to have better response and pickup. This item is well worth the money. By the way I also installed the Metisse rear sets, and tail raisers. The handling, along with the H2 Race tires from Mich. is outstanding! The rear sets bolted on without any problem at all. By the way I ordered a Nikko Carbon Extreme high rise and it looks and sound great!! My bike GSXR 600 2000 model. Greer |
| June-24-02 Hi Irfan I received my Metisse tail lifter kit and t-shirts last Fri. It was cake to install and made my SV 650 handle like a GSXR. Well almost. Thanks again. Steve P. |
| June-24-02 I figured you could use a picture. I love the Metisse head light by the way, Thanks again. It used to be on my Vmax. Scot |
| June-19-02 Just a note to say that I recently purchased a 2002 Suzuki Bandit 600 and was surfing for sites that carry stuff for the Bandit. You guys have the best website for accessories that I have ever seen. You will be getting my business and I have already been passing your site address around to my friends. Keep up the great work!!! Regards, Mike Kennedy, PA , USA |
| June-17-02 Hello Irfan I just wanted to send you a few pictures of my bike since I have finished my project. Thank you for the great service and you will be hearing from me soon. I have found a few more pieces that would look good on my bike. Gordon |
| May-30-02 Hi You guys are just what the motorcycle scene here needs. No more cruisers and tourers. We need more fighters and sportbikes. Steve P. |
|
May-22-02 The parts that I ordered were received 2- weeks after I ordered them. I have been waiting on some American, after market parts for almost 7 weeks now! The finish and the fit of all the parts was excellent. The Gimbel belly pan was a snap to paint and mount. I am placing an order for additional parts immediately and will send you photos of the finished bike. Thanks again for the great parts and great service. Mike from Georgia |
|
May-20-02 Hi, I finally installed the Spiegler stainless steel brake lines I ordered from you about a year ago. What a difference, the bike feels like it has an anchor *and* a parachute. thanks, Todd |
|
April-29-02 I appreciate your help here. I will make sure to spread the word out of your company. You have been extremely helpful and knowledgeable. Raymond |
|
April-27-2002 I thought you'd like to get some customer feedback on the Metisse G-Pack I had purchased from you about a month or so ago for my SV650. I finally got the airbox. It performed pretty well. Once I hooked the G-Pack up it made all the difference. The front wheel started to come up effortlessly under only a conservative amount of throttle. When I really got into it, the acceleration was amazing. Great product, worth the cash. Thanks, Justin |
|
April-26-02 Hi Irfan Just wanted you to know how excellent the Gimbel belly pan turned out for my SV. I was really impressed with the quality of the piece and it's hardware. Really nice! I also wanted to say how I appreciated your patience and helpfulness with my order. Big thumbs up to you and the team. I'll be coming back for sure. Attached is a .zip with the latest pictures. Kevin, Tx |
|
April-23-02 Your site rocks by the way, I will DEFINITELY be telling all my friends about your site, as well as some local shops (they need your stuff). I am now a total "Street Fighter" Convert, and will spread the word. Thank you, Obie |
|
April-17-02 Hi, Every now and again I check your site out, PLEASE open a branch of your company in the UK. There is a serious lack of Street Fighter parts stockists in the UK. If possible please can you post me a copy of your catalogue and prices for shipping. (I'll see if my mates will start using you and we can start placing orders!!!) Thanks in advance Your fellow biker (although in England!!) Rich |
|
April-15-02 thank you very much for the parts you sent me. I'm very happy with the products and it was worth waiting for..... nice doing business with you. I will keep in touch ......thanks. supermike Florida |
|
April-08-02 Hi Irfan! I wanted to let you know I received the Metisse fork protectors today just as you said I would. I was impressed with the quality, they were even nicer than I expected. I like the way you do business your honest and efficient. Thank you! Rob |
|
April-05-02 Hey Irfan !!! I love ALL the accessories that I've purchased from Wild Hair Accessories ! The BD luggage rack, MRA windscreen, and the Gimbel belly pan to date . I've been very impressed with quality of every item that I've purchased . Rear sets next ! I appreciate the input that you have given me on installations, painting, mounting, etc.. I appreciate it ! You told me to snap some photos, so here's a couple if you want them. Until next time, thanks Irfan !!! - Mark |
|
March-20-02 You guys rule....you are definitely the #1 place for streetfighter parts and I will be doing a lot of business with you in the future . thanks |
|
March-18-02 Irfan, I got my Spiegler bars and the Hagen F 1 mirrors for my Honda 919 today. Thanks for the quick delivery (only two days). I already installed them. What an improvement these two things make appearance wise! Everything fit Ok. Your choice in handlebars was perfect. No problems. I can't wait to take it for a ride but right now I'm watching the kids (while I was working). Thanks again. I'll be looking for 919 items. The bars and mirrors were necessities. Dennis |
|
March -18-02 I wanted to let you know that my Hagen handle bars arrived yesterday. It took me a few hours to install them and retune everything, but they are awesome. The position is much more aggressive and the purple looks great. I'll send you some pictures when I get my digital camera working. Thanks for all your help. Mark |
|
March-14-02 Irfan, Thanks so much for your speedy and friendly service! I am glad to have done business with you and I will recommend you to all of my fellow riders in North Dakota to purchase from you! Have a good day, Ian |
|
March-12-02 Got it Irfan. The pictures will come within a month. Paul at Madmax is still working on the fat tire system. My painter was very impressed with the design and construction of the MEK belly pan. Thanks, Glen |
|
Feb-26-02 Thanks a lot for getting back to me. I appreciate our attention. By the way, I have posted a link to your site at a popular message board because your service is excellent. I am hoping it will get you some business! I will be looking into a Nikko exhaust for my SV early this summer - and I will be ordering it from you. Thanks again! -- Shelly Austin, Texas |
|
Feb-25-02 Hey Irfan The Metisse radiator cover arrived today...looks great! Thanks for the speedy shipping, I wish everyone I dealt with was of your caliber, will recommend Wild Hair to all that ask...Thanks again Mitch |
|
Feb-11-02 |
| Jan-18-02 K.... THANKS FOR EVERYTHING!!!! I GOT MY FAIRING AND PUT IT ON. IT LOOKS GREAT. I'M GONNA KEEP YOU ALL IN MIND FOR ALL MY FUTURE NEEDS AND TELL ALL MY FRIENDS, TOO....APPRECIATE YOU, THANKS. MS. GIBBS |
| Dec-31-01 Hi!!! Finally I received the parts I ordered. I know that the delay had nothing to do with you. However, try to understand me. Finally, I received them and I have installed every single part of it. I would like to take this opportunity to tell you that every single part fitted by bike exactly, not one single millimeter in difference. I am very happy with the Bandit Custom Kit and very satisfied with you service. I would be very happy to order once again from your company. I am also attaching some nice photos of my bike, which I would be very happy to see on your web site. Please do inform me when these photos are ready on the website. With these photos, I would be the first Bandit Owner from Malta to have his photo online. Thanks a lot and hope we make more business together in near future. I would also like to take this opportunity to wish you all a very happy new year!!!! Best Regards Simon.............from Malta |
| Dec-07-01 Irfan. Thanks dude, bike looks awesome, I'll order something from you soon and you got my total satisfaction for this product (Tail Lifter '01 ZX 6R), bike handles like you would not believe!!!!!! Thanks jjsami 1 |
| Dec-06-01 Greetings Irfan Absolutely love the Telefix Profi Clip Ons. Thanks! Mike |
| Nov-20-01 Installation of the Metisse Belly Pan was a breeze. Thanks I love the look. I also had the pipes coated at HPC Coatings. They call it high luster stainless finish. The belly pan is perfect accent to the pipes color (I think). If you want to use these pics let me know and I will take better ones on a better day and more scenic location. Thanks again. Ed |
| Nov-02-01 Irfan, I have received all the items I have ordered and am happy with all of them. Thanks a lot! I just noticed the LIE Fairing for the 900ss on your website yesterday - I think that is the most beautiful fairing I have seen. I'll probably order one in a few months.... Mike p.s. Saw your ad in the latest Cycle World magazine. |
| Oct-25-01 I love your site! I've been searching for reasons to keep my 2000 Bandit 600, and your site gave me the best reasons yet... I didn't know that accessories like that were available! I live in Scottsdale AZ, which is rather close to Glendale where you are located. Thanks in advance for your help... awesome site! -Aj |
| Oct-18 to Oct-24-01 Hi Irfan...... My job is complete !!!!!! The bike has a perfect new Metisse Under Seat Tray and Hagen Low Rise Handle Bars..... It took a little work ,,, but after completion,,, it really was an easy installation..... Thanks for your help and your WILD HAIR ACCESSORIES..... I like the new NEWS section..... I see you now have the hugger for the ZR-7.....you are a little to late for me on that one...... keep up the good work...... I just wanted to thank you again for all the products your company offers guys and gals like us, who want to add a little uniqueness to our bikes.... Also,,, thanks for the money contribution to the New York disaster.... Jerry from New York |
| Oct-24-01 I would like to order some stuff from u guys but I'm in Canada and its going to be kind of, well I have to exchange to US dollar, but if u know any one that is located in Canada that works for u guys I'll be more than happy to order from there. Tx Val Again this is the only site that I went into and got everything u need, excellent job guys. |
| Oct-20-01 Thank you again soooo much. I have had a zillion compliments from just about everyone... and I love the way it turned out... thanks again! David |
| Sept-10-01 Irfan Here are photos of the installation. I painted the brackets gloss black before installing them and I also chased the internal threads with a tap since they were a little rough. I substituted shorter SS bolts for the originals which were too long and used thread locker when I installed them. Very pleased with them. Paul |
| Sept-10-01 Dear Irfan, I am very pleased with the outcome of my ordering from your business. Everything was shipped as you said it would be and I appreciate not being billed until it arrived in your office. I am very pleased with the Metisse Dual Headlight kit for my Vmax. Attached is a photo that I would like to post on your site. Thanks again and hope to order from you in the future- Scot 1989 Yamaha Vmax |
| Sept-07-01 Thanks Irfan It's great to finally meet someone in this business that puts such importance on excellent customer service. Keep up the good work. Ernest |
| Aug-28-01 Thanks Irfan, The Metisse Headlight Fairing arrived today looks cool I fitted it already. I'll defiantly use your company in the future. Best regards Kevin |
| Aug-21-01 Irfan - I received my MRA spoiler screen and stainless radiator cover Friday. Both are very nice pieces. They went on without a problem. I will see about sending your pictures (I am getting ready to paint the bike in the firecracker red European paint scheme). I mentioned your name on the ZRXOA site. Thanks again, Greg |
| July-30-01 Hi. I just found your site and it's been incredibly helpful. I'm in the process of converting my '92 GSX-R1100 into a streetfighter and was having trouble finding headlight kits. I saw some on your site and was wondering if you could email me some additional photos or direct me to a site so I could examine them more closely. The two I'm considering are the MET Double Headlight (on the GSX page) and the HAG Laser unit on the Head light page. Thanks a lot, and again, fantastic site! I certainly hope the streetfighter trend catches on over here. |
| July-27-01 Irfan, I just wanted to let you know that I received the headlight fairing. I will let you know how it fits when I install it. Thanks for the good service. Bryan |
| July-23-01 Hi Irfan ! I received my luggage rack Saturday, and just wanted to mention how well pleased I am with the quality & fit. I really needed it, so it was more of a necessity than accessory ! I will contact you again soon to order the GIM belly pan, and possibly the MRA windscreen. Thanks again !!! Mark |
| July-21-01 Irfan, I wanted you to know I got my Telefix "Profi" clip ons on Friday ,they look like they'll work great. I wanted to thank you for the quick shipping, I really didn't think they'd get here that fast. Now I can have them in for my Sunday ride . Thanks again Andrew Jones |
| July-17-01 Hello Irfan; I'm very happy with the Lucas Rear Sets, also the Spiegler brake line fits well however it could be 1" shorter for future customers. My friend just bought the new GSXR-1000. Will aftermarket products be coming soon? Also I took some photographs to send you as soon as they're developed. Please send me your complete address via e-mail. Thanks Again !! Greg Perdu |
| June-20-01 Whoa! That was quick. Its easy to see why the guys on the ZRXOA board think so highly of you and your business. I think the Hesa tail may have to wait, but expect my order for the dual-headlamp conversion, fly screen, and Gimbel belly pan by the end of next week. Have you sold any of the dual-light conversions to a ZRX owner? Take care, Pete |
| June-19-01 Hello Irfan, This is Bobby in St. Louis, MO. just letting you know I received the BD safety stirrups (case protectors) for the ZRX 1200. They fit nice and were easy to install. Thanks again. Bobby |
| June-19-01 I certainly will send you the pics Irfan. They probably will be without paint for awhile though. Looking forward to doing business in the future. You always respond to the e-mails that I send in a timely manner. I appreciate that and it means allot! Dean |
| June-18-01 Irfan, The Lucas rear sets arrived Saturday morning, I had them on before the sun could heat the pavement. The fit? excellent . . installation was a breeze. The placement of my feet and legs? excellent . . the bike just wants to lean harder into every curve. The look? great, but I would have preferred less shiny. Your service? excellent. I sure hope you can find me a sport fairing, because it's a pleasure doing business with you. Thanks and regards, David. |
| June-15-01 Irfan, Thank-you so much for the Gimbel seat-cowl. I have had it painted, I have re-drilled the mounting holes in the correct places, and I have installed it on my Bandit 400. The cowl is very beautiful, very high quality. You will most assuredly be hearing from me and my acquaintances for future purchases of other accessories. Keep up the great work! May you and Wild Hair Accessories prosper. Best of Luck! Gerry |
| June-06-01 Aloha Irfan, I got the Gimbel belly pan and the frame protectors today. The bike looks great! Once the brackets are in place, the belly pan is easy to install! A little advice to anyone buying these pans. Have them install the brackets and pan first, then take off and paint them! I was so excited that when I got it, I took it outside and painted it! Then tried to install it! WRONG MOVE VICTOR! Anyway, the bike looks great even with a few scratches! I'll resand and paint it this weekend and take a few pictures and I'll send you some! Until then, Aloha And Mahalo Nui Loa!! (hawaiian for thank you very much) Victor |
| May-26-01 Hi Irfan, Just wanted to let you know that the MEK windshield arrived and it works a looks great. Really reduces the upper body wind loading and still keeps in lines with the original V-max styling. It's not the easiest thing to install, but well worth the effort. Thanks. Mike |
| May-24-01 Great site.... I'd like to purchase a lowering kit for a 2000 SV650.... Thanks |
|
May-21-01 |
| May-02-01 SO many people have stopped me to ask what kind of bike it is. Every time I go out, at least 3 or 4. My next project is going to be a naked 1200. I'm going to go for the total street fighter look with it - so be on the look out for some more orders! Thanks again Irfan. -JP |
| April-24-01 This is the style and attitude that I have in mind, and not many people in America have the imagination to change their bike to a higher level of cool. I think I'll be ordering something soon see you later, TRIP PIVOT (or Jeff at the Kawasaki shop) |
| April-23-01 Irfan, Thanks to you and your team at Wild Hair. The BD Luggage Rack for my ZRX fits and looks great! I'll check out some of the other goodies you have as money becomes available. Take care, A happy customer! Will K. |
| Feb-19-01 Check out the photos attached for how the parts look installed Paint Cost $150.00 Installation took about 2 hours Thanks RC |
| Feb-12-01 I recently installed your Hesa shock covers and Logo chain guard to my 1999 Kawasaki ZRX 1100. I am very impressed with the results. I would be honored if you featured my bike on your website. Here are the pics: If you do use my pics, please advise when they will be posted so that I can include a message to the rest of the ZRX Owners Association Members. Thanks, John S. |
| Feb-04-01 Here is the Metisse rear hugger pictures for your site. It looks great. Very pleased. Thanks: Gord |
| Feb-03-01 Here's my '00 SV. Metisse Dual headlight, stainless steel fly screen, and Hagen formula one mirrors purchased from Wild Hair Accessories (excellent service, nice guys, even sent me a Christmas card!). Race Tech springs next, then some rear sets, maybe some clip ons, and eventually a side car (YEAH RIGHT!) I do a lot of riding up in the Santa Monica mountains and visit the Rock Store regularly on Sundays (a southern CA motorcycle mecca). Hope to see more SV's up there in the coming year. Stevan |
| Jan-28-01 Hi Irfan, here are some pics of the bike with your products. They went on without a hitch! Great products and great service! Thanks, Blackie |
| Jan-26-01 Thanks a bunch, you've been great! I'll be looking forward to getting the parts. I really appreciate how helpful you've been. I've dealt with a lot of parts suppliers, but know one has had this kind of selection or service. Thanks again. Vincent |
| Jan-22-01 Hi Irfan, the handlebar (it looks great!) arrived today, I'll install it tomorrow, I'll wait for the hugger before I take pic's to send you. Thanks for the great service! blackie PS if you and your fiancée ever get to Eugene, drop by! |
| Jan-21-01 Hello, and thanks for an awesome website! I have a 1988 Honda Hawk GT 650 and I am looking at having a windscreen installed. I am interested in 2 of the windscreens that you carry, the "vampire" and the "classic". Could you give me some insight into which of these would be easier to install on my bike? They both look great, and any info you can give me would be wonderful! Thanks a lot! Amy Phillips HawkGirl "Life is either a daring adventure, or nothing" |
| Jan-19-01 Irfan, Just a note to let you know I got the Seat Cowls! Awesome! Thanks for all your service. I am recommending you to all that I know... Miles |
| Jan-16-01 Hi Irfan , The handle bar adapter and bars work great I need to get some bar end weights for the aluminum gold bars. The reason I sent all the rest of the old e-mail in front of this message is so that I would refresh your memory on what I have .I'd like to get the heaviest weights you have in gold or black, Preferable in steel . It has to slip in and be tightened up with a screw through rubber . The Bars don't have threads in them If you still have my credit card info just apply it to it or e-mail me back and I'll call back and resubmit it . The pic's I took didn't come out too good So I'll try to get a better one . Hoping to here from you soon Keep up the good work Nick |
| Jan-09-01 Hi Irfan, My seat cowl just arrived and I am very pleased with it. Color matches perfectly and fit is fine. I was wondering what the foam tape was for? I haven't figured out where it goes. Thought any more on the sponsorship? Thanks, Shane |
| Jan-02-01 Hope things will be busy for you this new year. Your products I believe are excellent. Really touch to receive the Christmas card. Thanks Just wanted to check in about the rear hugger? Did it get out of Germany before the Christmas closures? Gord (spedee) |
| Dec-19-00 Hi Irfan, Thank you for your professionalism. Happy Holidays Gigi |
| Dec-14-00 Hi Irfan, The Metisse hugger just arrived....that's very nice !! I am going to fit it this night, then I will take some pic's and send to you, ok... MERRY CHRISTMAS !! Carlos Hermida |
| Dec-06-00 Thanks for a GREAT PRODUCT!! Here's some photo's. Summertime will be a better photo shoot. Gord |
| Dec-04-00 Oh yea... your site is great and you have MORE accessories than anyplace else I've looked. I hope to become a customer of yours. Mike Ledger, again. |
| Sept-27-00 Irfan, Here's a zip file with the first pic's with the new bars. I'll get outside this weekend to get better pic's with a blank background. If you turn them just right when installing them and use MX grips, they J-u-s-t clear everything. I LOVE 'em! What are you doing this week end? maybe I'll cruise over your way any let you ride 138 horsies! Pete |
| Sept-27-00 Hey Irfan! The mounting of the mirrors went fine. There are no steer weights on the Vmax, just plastic chromed caps that can be taken off with some fizzling around. Part of the gas handle grip needs to be adapted (shortened), but nothing major. Here are the pic's asked for. Could you tell me the external sizes of tail light #1 on this page, and send me more pictures? Bis spaeter, Greg. |
| Sept-19-00 Hi Irfan, I received the Telefix Profi clip ons yesterday. Great workmanship and design!. Thanks! VTR 1000 F Rick |
| Aug-17-00 I have the Gimbel Belly Pan painted and installed and absolutely love it. I get many compliments and the ZRX and it's unique look. As soon as I can get a digital camera I will take a picture and forward it to you. Thanks for your continuing customer interest and focus. Derek |
More StreetFighter
Accessories available. Check the link below!! |
|
|
